Prices incl. VAT excl. shipping costs
- Item no.: 82160
The alarm and emergency telephone dialler is ready after a short moment. After activation via keypad or remote control, you have ca. 55 seconds to leave the monitored area – after this time the device is armed.
If a movement is detected, you have a programmable delay time of 0 to 20 seconds to unarm the unit. If not unarmed in time, a 100 dB loud alarm will be released and the stored phone number(s) will be dialled. Up to 5 phone numbers can be stored – an analogue telephone line is needed. It is also possible to deactivate one of the both reactions.
Due a panic button on both the remote control and the keypad, the usage of an emergency signal (e.g. for old peoples or those in need of care) or is possible. The alarm reaction will be the same as when a normal alarm will be released (alarm siren and/or telephone call).
Further it is possible to change the reaction from alarm siren to a gong function. Thus it is for example possible to run the device during opening hours to inform you when customers enter your store, and to switch back to alarm mode at closing time without having to install an additional entry detector.
The motion detector is expandaple into an alarmsystem: for example the use of additional motion detectors, magnetic contacts, sirens or strobe is possible. A second remote control can be enrolled, too.
• PIR range: ca. 6 m with ca. 100° angle
• Power supply: 9 V mains adapter or 9 V backup battery
• Siren: 100 dBA
• Siren duration: ca. 30 sec in turn with ca. 30 sec pause
• Material: ABS
• Dimensions: 86 x 150 x 46 mm
• Weight: ca. 197 g (without batteries and accessories)
Scope of delivery:
Alarm unit, antenna, mains adapter (ca. 1,8 m cable), remote control incl. battery, installation and connection material (ca. 2 m telephone cable with RJ-11 plug), detailed instruction manual in D, F, NL, GB and I.
Used batteries do not belong into domestic waste.
More informations to battery ordinance
|Loudness :||100 dB|
|Loudness :||100 dB|