30 Joule export valve "Powerkit.50" for the Umarex TR50 / HDR50 GEN.1 & GEN.2

With this export valve, the normal Umarex TR50, with a standard power of 7.5 joules, becomes an extreme TR50 with a fabulous power of 20-30 joules.

Depending on the ammunition, you then have approx. 10-15 rounds per capsule.
 
Basically, at least 20J+ are possible with this Powerkit.50. Achieving a higher power of up to 30 joules depends heavily on the ammunition used and the correct temperature.
The Powerkit.50 can also be easily installed in the old version of the HDR50.

Technical details:
• A valve is no longer required in the pressure chamber
• Increases the power to up to 30 joules (depending on temperature*)
• Longer valve opening time, larger gas volume
• Reduced cool-down effect
• Valve pin made of high-strength special aluminum for better sliding and protection of the sealing ring

Installation can be reversed at any time.
*As CO² is very temperature-dependent, we recommend storing the CO² capsules at room temperature, as this causes the CO² to expand and the general pressure in the gun increases. In addition, the capsules do not freeze so quickly during use.

For comparison:
- A Rocketkey produces a power of 10 -13 joules.
• This set-up has an output of 20-30 joules and you have approx. 10-15 shots depending on the ammunition.

Scope of delivery:
• Pressure chamber insert
• Valve pin
• Auxiliary tool

Attention strong performance increase! Not suitable for paintballs. Only suitable for the 7.5 Joule (F version).
The purchase and possession of this export valve is free, the installation is prohibited in Germany due to the performance increase and can lead to the loss of warranty claims.

Made In Germany