20+ Joule Exportvalve "Powerkit.50" for Umarex TP50 GEN.1 & GEN.2

With this export valve, the normal Umarex TP50, with a standard power of 7.5 joules, becomes an extreme TP50 with an incredible power of 20 joules and more.

Depending on the ammunition, you then have approx. 10-15 shots per capsule.

Basically, at least 20J are possible with this Powerkit .50. Achieving a higher power of up to 30 joules depends heavily on the ammunition used and the correct temperature.
The Powerkit.50 can also be easily installed in the old version of the HDP50.

Technical details:
• A valve is no longer required in the pressure chamber
• Increases power to over 20+ joules (depending on temperature*)
• Longer valve opening time, larger gas volume
• Reduced cool down effect
• Valve pin made of high-strength special aluminum for better sliding and protection of the sealing ring

Installation can be reversed at any time.
*As CO² is very temperature-dependent, we recommend storing the CO² capsules at room temperature, as this causes the CO² to expand and the general pressure in the gun increases. In addition, the capsules do not freeze so quickly during use.

Scope of delivery:
• Pressure chamber insert
• Valve pin
• Auxiliary tool

Attention, strong performance increase! Not suitable for paintballs. Only suitable for the 7.5 Joule (F version).
The purchase and possession of this export valve is free, the installation is prohibited in Germany due to the performance increase and can lead to the loss of warranty claims.

Made In Germany